Quick Facts:

– Hydro jetting is a plumbing practice in which pressurized water is sent through pipes to unblock them.

– The average cost of hydro jetting ranges from $145-$364, and it takes one hour to finish the job. 

– A cleanout system, also known as a sewer rodding system, is often used to unclog drains in concrete that are no more than 4″ in diameter 

– Hydro jetted drains can help the pipes stay at a more optimal flow rate and prevent sewage back up with ease. 

– Find someone who has experience with hydro jetters such as Plumbers in Daly City.

Introduction:

Hydro Jetting is a plumbing practice that uses pressurized water and a pipe to clear clogs from sewer systems. Below are some of the things you might want to know before using this service, such as cost, how it works, and who should perform hydro jetting.

Cost:

The cost for hydro jetting can vary depending on the area’s size and construction debris or other obstructions in the path of drain lines. The average cost for this type of work ranges anywhere from $135 – $470. Contact us today to learn more.

For what is Hydro Jetting used?

Hydro Jetting can help clear out young clogs from drain lines without causing any damage to the pipes. This practice is also used for cleaning out older clogs that are extensive and contain hard materials, including roots, dirt, grime, grease, and food particles. The cleansers and debris dislodged by this process will go down the drain lines while the unwanted materials remain in the trench. Hydro Jetting can also be used to open up pipes damaged by tree roots or when drainage pipes have corroded due to age.

How does Hydro Jetting Work?

Plumbers can use a sewer rodding system to unclog drains in concrete that are no more than four inches in diameter. The Plumber can then use an auger to push the mixture of water and cleansers down the drain line. The reader should note that hydro jetting is not always just a cleaning process. Sometimes it is also used as a way to connect drain lines. Property owners and builders can also use this process to unclog any main or storm drains at their home or business, depending on local laws. Some counties even allow this service in parking lots without restrictions as long as it’s a small area and the work can be done safely.

Is Hydro Jetting Safe?

Yes, hydro jetting is a safe process. All of the equipment used for hydro jetting is thoroughly inspected before and checked for any problems or damages. If any of the equipment is found to be faulty or broken, the plumber will not use it to avoid putting anyone at risk. The entire process of hydro jetting is performed by a professional plumber who has been trained in this practice. If you have any questions about our Hydro-Jetting process and how it works, contact us today.

Who should perform hydro jetting?

Hydro jetting requires a high volume of water pressure to work effectively. It might not be the best idea for you to do this job on your own, especially if you’re dealing with foundation drains that require heavy-duty equipment to penetrate. A plumber or professional sewer service is more likely to have the tools and experience needed to complete this plumbing process.

How long has Hydro Jetting been used?

Hydro jetting has been used for a long time by experienced professionals who live in the area. The process was developed in the late 1800s and early 1900s to unclog sewers damaged by tree roots and other obstructions. Although most people are unaware of how this plumbing practice works, it has been continuously utilized since its development.

What are some alternatives to Hydro Jetting?

Although hydro jetting can be an effective way to clear clogs from sewer lines, it might not always be necessary to hire a professional plumber. Depending on the clog type, a plumbing cleaner or auger that is safe enough for small residential drains might be used. Other tools safe for drain lines in concrete include step ladders, hand tools, and mechanical broom-type cleaning tools. These kinds of cleaners may provide some good results if they are performed properly.

What equipment is used in the process of Hydro Jetting?

The equipment used in hydro jetting includes:

  • A water supply and vacuum.
  • A pipe that is funneled into the drain line.
  • A nozzle on the end of the pipe.

The nozzle has pins or bits that rotate at high speed and are used to agitate the clog. Often, an attachment on this nozzle allows for more water pressure to flow through it for even better results. The equipment used in hydro jetting can also be rented, which means that you don’t have to purchase any of the gear required for this process. Contact us today to learn more about this practice and how it can benefit you.

What are some of the advantages of using Hydro Jetting?

Hydro jetting is a good idea if you want a fast removal of clogs from your lines without damaging your pipes or having to dig up and replace them. One of the main reasons that hydro jetting is so popular is that it can save you time and money. This process works to crack through the sediment and debris that are blocking the pipes from draining correctly. In the long run, this plumbing process can help your drain lines function better than before.

Whom should I call to perform Hydro Jetting?

Our trained plumbing technicians are always willing to help you. We offer hydro jetting and related services in Daly City and can be reached by calling us at 415-465-5719. There is no need to wait before giving us a call, as we will be glad to take your call and help you out.